Protect your health. Protect your investment.

Our services include Carpet and Upholstery Cleaning, Carpet Repair & Re-Stretching, Pet Odour Removal, Pure Water Window Cleaning, Water Damage Services; Water Removal & Drying, Mould Remediation, Tile & Grout Cleaning, Grout Colouring.

A Greener Clean!

Environmental responsibility and the health of our clients and staff is #1! We use eco-friendly green products and combine that with cleaning methods that contribute to a healthy living or work environment. We are continually sourcing greener technologies and solutions.

Emergency Water Damage Restoration 24 7 Response

Water damage demands immediate action. Emergency water damage restoration - 24/7 response - is the rapid assessment, extraction, drying, and remediation of properties affected by flooding, pipe bursts, roof leaks, or other acute water intrusion. Multiline Services operates around the clock in Burlington and the surrounding Greater Toronto Area, arriving equipped to halt damage progression before structural and material loss compounds. Because water-saturated materials begin supporting mould growth within 24 to 48 hours, and because standing water continues degrading drywall, insulation, and subflooring, speed is not a convenience-it is the foundation of effective restoration.

This guide walks you through the essential steps Multiline Services follows during emergency response, so you understand the process, know what to expect, and can prepare your property for professional intervention.

Step 1: Contact Multiline Services Immediately and Document the Damage

The moment water enters your home or commercial space in Burlington, reach out to Multiline Services. Because they maintain 24/7 availability, calls placed at 2 a.m. on a Sunday receive the same priority as those at 9 a.m. on a weekday. When you call, describe the water source-burst pipe, roof leak, basement flooding, appliance overflow-and the area affected. This information allows the response team to arrive with appropriate equipment: portable extraction units for standing water, high-velocity air movers for drying, and moisture detection instruments for assessing saturation depth in walls and subfloors.

While waiting for arrival, document everything using photos or video. Photograph standing water, wet materials, the source of the leak if visible, and any items already damaged. This documentation supports insurance claims and gives the Multiline Services technician a baseline for before-and-after assessment. Do not attempt to remove standing water yourself using household shop vacuums-improper extraction can spread contamination and misses moisture trapped in structural cavities.

Step 2: Allow Professional Water Extraction and Initial Assessment

Upon arrival, Multiline Services technicians perform a moisture survey using calibrated meters to measure moisture content in drywall, wood, carpet, and subfloors. Moisture readings above 16 percent in structural materials indicate saturation requiring active drying; readings above 12 percent in contents demand intervention. The technician maps affected zones and determines whether materials can be salvaged or must be removed.

Water extraction follows immediately using truck-mounted or portable extraction equipment capable of removing 95 percent of standing water from carpet, tile, and concrete. For basement flooding or large-scale intrusion, Multiline Services deploys high-capacity units that process hundreds of gallons per hour. The extraction phase typically takes 2 to 6 hours depending on volume and area. Once standing water is removed, air movement begins: high-velocity air movers are positioned to circulate air across wet surfaces, and dehumidifiers are deployed to pull moisture from the air and structural materials. This combination prevents mould colonization and arrests structural decay.

Step 3: Implement Targeted Drying and Monitor Moisture Reduction

Drying is not instantaneous. Depending on humidity levels, material composition, and saturation depth, complete drying takes 3 to 7 days for typical residential water damage. Multiline Services monitors progress using moisture meters, returning to take readings at 24-hour intervals. Moisture content in drywall, subflooring, and framing must decrease steadily; if readings plateau or rise, equipment positioning or ventilation strategy is adjusted.

During this phase, the environment inside your Burlington property may feel uncomfortably dry-humidity levels can drop to 30 percent or lower-but this is intentional and temporary. Eco-friendly, energy-efficient dehumidifiers and air movers are run continuously. Your HVAC system may also be adjusted to support drying without reintroducing moisture. Technicians check seals on windows and doors to prevent humid outdoor air from entering during high-humidity weather. Once moisture readings fall below 12 percent in structural materials and below 8 percent in subfloors, the active drying phase concludes.

Step 4: Remove Damaged Materials, Treat for Mould, and Prepare for Restoration

Any materials that cannot be dried sufficiently-soggy drywall, saturated insulation, warped subflooring, or contaminated carpet-must be removed and disposed of properly. Multiline Services handles this removal and documents it for your insurance adjuster. Subfloors and wall cavities are inspected for hidden moisture pockets; if found, targeted drying or selective material removal addresses them.

Before restoration begins, all exposed surfaces are treated with hospital-grade, eco-friendly antimicrobial products to inhibit mould growth. This preventive treatment is applied to subfloors, rim joists, wall cavities, and any wood framing exposed during water damage removal. This step is essential in the humid climate of the Greater Toronto Area, where mould spores thrive in damp environments. Once treatment is complete and moisture monitoring confirms full dryness, your property is ready for reconstruction-new drywall, flooring, insulation, paint, and finishes-or handed back to you for your contractor to finish. If you need specialized attention, Multiline Services also offers carpet repair in Burlington and the surrounding region, ensuring continuity of care for your entire property.

Water damage in your Burlington home or office is stressful, but emergency response that begins within hours-not days-stops the cascade of secondary damage. Multiline Services combines 40 years of restoration expertise with modern drying technology and a commitment to your property's full recovery. If water damage strikes, the first call should be to a business you can trust to show up immediately and work until your space is safe and dry again.

If your property has experienced water damage or you want to understand your options before an emergency occurs, contact Multiline Services. They will walk you through the process, answer your questions, and ensure you feel confident in the path forward.

Frequently Asked Questions

How quickly does Multiline Services respond to water damage calls in Burlington?

Multiline Services operates 24/7 and aims to dispatch a technician within 1 to 2 hours of your call, regardless of time of day. The faster they arrive, the less secondary damage-such as mould growth and structural deterioration-occurs. Rapid response is the cornerstone of effective water damage restoration.

What is the difference between water damage restoration and mould remediation?

Water damage restoration focuses on extracting standing water, drying materials, and removing unsalvageable content to halt damage. Mould remediation addresses mould that has already grown, identifying its source, containing it, removing affected materials, and treating surfaces. Water damage restoration often prevents the need for mould remediation if completed quickly.

How long does it take to fully dry a property after water damage in Burlington?

Complete drying typically takes 3 to 7 days, depending on the volume of water, materials affected, humidity levels, and ventilation. Multiline Services monitors moisture content daily using calibrated meters and adjusts drying equipment as needed to ensure thorough, even drying that prevents hidden moisture pockets and mould growth.

Will my carpet be ruined if water sits in it for several hours?

Carpet soaked with clean water can often be salvaged if extraction and drying begin within 24 hours. However, if water contains sewage, chemicals, or sediment, or if the carpet has been wet for more than 48 hours, replacement is usually necessary. Multiline Services assesses your carpet's condition and recommends restoration or replacement based on the water source and saturation timeline.

Get your business back to business – Covid-19 Disinfection

Multiline Services disinfection process use hospital approved disinfectant and are CDC & Health Canada approved cleaners.

The process includes:

  • Electrostatic sprayer, pump, battery sprayer, or manual spray process
  • Use of hospital grade, EPA approved disinfectants
  • Adherence to CDC guidelines including PPE

High-frequency touch area disinfection include items such as:

  • Light switches
  • Handrails
  • Elevator buttons
  • Door handles and entryway doors
  • Restroom faucets and dispensers
  • Phones, keyboards and mouse devices