Protect your health. Protect your investment.
Our services include Carpet and Upholstery Cleaning, Carpet Repair & Re-Stretching, Pet Odour Removal, Pure Water Window Cleaning, Water Damage Services; Water Removal & Drying, Mould Remediation, Tile & Grout Cleaning, Grout Colouring.
A Greener Clean!
Environmental responsibility and the health of our clients and staff is #1! We use eco-friendly green products and combine that with cleaning methods that contribute to a healthy living or work environment. We are continually sourcing greener technologies and solutions.
Carpet Stretching
Carpet stretching is the process of removing wrinkles, buckles, and waves from installed carpet by using specialized equipment to restore the fabric to its original taut condition. Over time, carpet naturally relaxes and shifts-particularly in high-traffic areas, after water damage, or due to humidity changes. Multiline Services has spent four decades perfecting this restoration technique for homeowners and commercial property managers throughout Burlington and the Greater Toronto Area. This guide walks you through the professional methodology so you understand what the process involves and why proper execution matters.
Assess the Carpet Condition and Measure Wrinkles
Before any work begins, a thorough inspection determines whether stretching is the right solution and identifies the extent of the problem. Walk the entire carpeted space and note areas where the carpet lifts away from walls, creates visible waves across the floor, or bunches at doorways. Use a straightedge or long level to measure the height of wrinkles-buckles exceeding one-quarter inch typically warrant professional attention. Document the carpet's fiber type, backing material, and installation method, as these factors influence the stretching approach.
Multiline Services technicians also assess whether the carpet is glued-down, tackless-strip installed, or seamed. Seamed installations require extra care because stretching one section without accounting for adjacent sections can create new problems. Temperature and humidity at the time of inspection matter too; carpet behaves differently in winter versus summer conditions. A proper assessment prevents over-stretching, which can damage fibers or cause premature re-wrinkling.
Prepare the Space and Position Stretching Equipment
Clear the room of furniture, obstacles, and loose items so the technician has unrestricted access to all wall edges and floor space. Remove baseboards or quarter-round trim if they obstruct access-Multiline Services handles this carefully to avoid damage during reinstallation. Ensure adequate ventilation and temperature stability; stretching works most effectively when the carpet is at room temperature and the environment is neither too humid nor too dry.
Position a power stretcher-the primary tool for this work-in a central location where it can reach the furthest corners of the room. A power stretcher uses a motorized mechanism to grip the carpet and apply controlled tension, typically between 50 and 150 pounds of force depending on carpet type and backing. Secure the stretcher's tail block against a solid support (usually a wall or door frame opposite the stretch direction). Lay out seaming iron, knee kicker, and carpet trimmer tools within easy reach. Proper setup ensures smooth execution and prevents damage to walls, trim, or adjacent surfaces.
Execute the Stretching Process and Re-Secure the Carpet
Engage the power stretcher and apply tension gradually, moving it incrementally across the room in a systematic pattern. Rather than stretching in one direction only, professional technique involves multiple passes working toward different walls-this distributes tension evenly and prevents new wrinkles from forming on unstretched portions. As tension builds, the carpet should flatten visibly. Monitor for excessive stretching; fibers may fray or backing may separate if force exceeds the carpet's tolerance. The goal is to remove wrinkles while maintaining fiber integrity.
Once the carpet is properly tensioned, re-secure it to the tackless strip using a knee kicker-a hand-held tool that uses impact force to reset carpet fibers into the strip's teeth. Work systematically along all walls, starting at corners and moving along edges. Trim excess carpet using a carpet trimmer that cuts precisely along the wall line without damaging drywall or baseboards. For seamed areas, Multiline Services uses hot-melt seaming tape and a seaming iron to bond carpet edges, ensuring the seam is flexible and invisible to foot traffic. Finally, reinstall baseboards or trim using finishing nails, taking care not to puncture the newly stretched carpet underneath.
| Carpet Type | Backing Material | Recommended Stretching Method | Typical Tension Range |
|---|---|---|---|
| Cut pile (plush, saxony) | Latex or PVC | Power stretcher with even passes | 80-130 lbs |
| Loop pile (berber, level loop) | Latex or PVC | Power stretcher, moderate tension | 60-100 lbs |
| Glue-down commercial | Fiberglass or felt | Limited stretching; may not be viable | 30-50 lbs (if attempted) |
| Seamed sections | Any | Stretch adjacent sections separately; use seaming tape | Varies by section |
When carpet wrinkles develop after water damage, the process may involve drying the carpet thoroughly first-part of Multiline Services' broader water damage restoration approach. Moisture trapped beneath the carpet prevents proper tension from holding, so addressing the underlying moisture problem is essential before stretching. Similarly, if mould has developed in the carpet backing, remediation should occur before stretching to avoid trapping contamination beneath newly tensioned fibers.
For Burlington properties, seasonal humidity swings can re-introduce wrinkles months or even years after stretching if the carpet was not adequately dried or if the home experiences ongoing moisture. Multiline Services checks for underlying moisture issues and addresses them as part of the restoration process, ensuring results last longer. Commercial properties with heavy foot traffic may need stretching more frequently; this service is often bundled with regular carpet cleaning and maintenance programs.
Professional carpet stretching requires skill, proper equipment, and knowledge of fiber behavior across different carpet types. Attempting this work without experience risks damaging the carpet, creating uneven tension, or leaving wrinkles in areas that looked good initially. Multiline Services brings four decades of specialized training to every job, working with precision and care whether you need a single room refreshed or a large commercial space restored to its original condition.
If you notice wrinkles, buckles, or waves in your carpets across Burlington or the surrounding region, reach out to Multiline Services to schedule an assessment. Our team will evaluate your carpet's condition, recommend the best approach, and explain what to expect from the process.
Frequently Asked Questions
How much does carpet stretching cost in Burlington?
Pricing depends on room size, carpet type, the extent of wrinkles, and whether seaming or repairs are needed. Contact Multiline Services directly for a free assessment and estimate tailored to your specific situation.
Can all carpet be stretched?
Most tackless-strip installed carpet can be stretched safely. Glue-down commercial carpet has limited stretching potential and may not be a candidate. Multiline Services evaluates your carpet during inspection to confirm whether stretching is viable.
How long does carpet stretching take?
A typical residential room takes between two and four hours, depending on size and complexity. Larger commercial spaces or multi-room projects may require more time. Multiline Services provides an estimated timeline during the initial consultation.
Will carpet stretching fix wrinkles caused by water damage?
Stretching addresses the physical wrinkles, but only if the carpet is completely dry first. If moisture remains, wrinkles will return. Multiline Services includes moisture assessment and drying as part of water damage restoration before proceeding with stretching.

Get your business back to business – Covid-19 Disinfection
Multiline Services disinfection process use hospital approved disinfectant and are CDC & Health Canada approved cleaners.
The process includes:
- Electrostatic sprayer, pump, battery sprayer, or manual spray process
- Use of hospital grade, EPA approved disinfectants
- Adherence to CDC guidelines including PPE
High-frequency touch area disinfection include items such as:
- Light switches
- Handrails
- Elevator buttons
- Door handles and entryway doors
- Restroom faucets and dispensers
- Phones, keyboards and mouse devices




