Protect your health. Protect your investment.

Our services include Carpet and Upholstery Cleaning, Carpet Repair & Re-Stretching, Pet Odour Removal, Pure Water Window Cleaning, Water Damage Services; Water Removal & Drying, Mould Remediation, Tile & Grout Cleaning, Grout Colouring.

A Greener Clean!

Environmental responsibility and the health of our clients and staff is #1! We use eco-friendly green products and combine that with cleaning methods that contribute to a healthy living or work environment. We are continually sourcing greener technologies and solutions.

Carpet Repair

Carpet repair restores damaged sections of carpet fibre through targeted techniques that extend the life of your flooring and restore its appearance. Whether you are dealing with burns, tears, stains, or worn patches, understanding the repair process helps you determine when professional intervention is necessary. Multiline Services, serving the Greater Toronto Area from our Burlington base for four decades, specializes in identifying damage and executing repairs that blend seamlessly with existing carpet. This guide walks through the assessment and repair methodologies professionals use.

Step 1: Assess the Damage and Determine Repair Method

Begin by examining the extent and type of damage. Minor surface burns affecting only the carpet pile can often be corrected through pile lifting or gentle brushing; deeper burns that reach the backing require patch repair. Tears should be measured in length and direction-lengthwise tears follow the seams and are easier to repair than cross tears. Stains demand evaluation of both the stain type and fibre composition; some respond to specialist cleaning agents before repair becomes necessary.

Water damage, common in Burlington homes especially during spring thaw and heavy rainfall, may appear as discolouration or buckling but often requires subsurface assessment to detect mould growth in padding. This distinction is critical because affected padding must be removed and replaced rather than simply cleaned. Multiline Services routinely assesses whether damage warrants cleaning, localized repair, or full section replacement using hospital-grade diagnostics and moisture detection equipment.

Step 2: Extract and Prepare the Damaged Section

For patch repair, the technician outlines a square or rectangular section around the damage using a carpet knife or rotary cutter, typically 3 to 6 inches larger than the visible damage to ensure clean, straight edges. The extraction must follow seams where possible to minimize visible lines in the finished repair. Using a seaming iron heated to 350 to 400 degrees Fahrenheit, the technician carefully separates the carpet backing from the underlying pad, working from the edges inward to avoid tearing sound carpet.

Once extracted, the old padding beneath is removed completely and inspected for moisture, mould, or deterioration. New padding matching the original thickness and density is cut to size and secured with latex adhesive. The extracted damaged section is set aside as reference for colour and pile direction-this ensures the replacement patch will blend properly. In Burlington, where humidity and water intrusion are seasonal concerns, proper padding replacement prevents future wicking and mould development.

Step 3: Source and Install the Replacement Patch

The replacement patch should come from remnant stock or surplus carpet identical in colour, pile height, and fibre type. A sample from a closet or under furniture ensures the closest match. The patch is cut slightly larger than the opening-typically one-quarter inch on all sides-and positioned with pile direction aligned to the surrounding carpet. This directional alignment is essential; carpet pile reflects light differently depending on direction, and mismatched pile creates visible seaming.

Using a seaming iron set to 350 to 400 degrees Fahrenheit, apply seaming tape (a heat-activated adhesive strip) along the edges between the patch and existing carpet. Press the iron firmly for 10 to 15 seconds per section, working methodically along all seams. Once cooled, the seam should hold firmly with no separation visible. Multiline Services applies eco-friendly seaming products and techniques that cure to full strength within 24 hours, after which the repair area can bear normal foot traffic.

Step 4: Blend and Finish the Repair

After sealing, examine seams for any gaps, lifting, or colour variation. Use a brush or carpet comb to blend pile across the repair boundary, working in multiple directions to eliminate visible directional differences. For patch repairs visible to regular foot traffic, vacuum the entire area and allow seaming adhesive to cure fully before furniture is replaced or the area is cleaned.

If the repair involves stain removal prior to patching, residual cleaning solution should be removed with a wet-dry vacuum to prevent re-wetting. For water-damaged sections in Burlington properties, allow adequate drying time-typically 48 to 72 hours depending on humidity-before sealing seams. Multiline Services uses moisture metres to confirm the pad is dry to below 12 percent moisture content before completing any water-damaged repair, preventing mould recurrence.

If you are facing carpet damage from water, accidental burns, or stubborn stains in Burlington or the surrounding Greater Toronto Area, Multiline Services is ready to assess your carpet and determine the most effective repair approach. Contact Multiline Services today to discuss your specific situation and receive a professional evaluation.

Frequently Asked Questions

Can all carpet tears be repaired, or does damaged carpet always need replacement?

Most carpet tears and burns can be patched if the damage is localized and sound carpet surrounds it. Small tears under 2 inches, burn marks confined to a single area, and localized stains are excellent candidates for patch repair. If damage spans more than one-quarter of the room, multiple seams, or extends to the backing structure, full replacement becomes more cost-effective and durable than multiple repairs.

How long does carpet repair take, and when can I use the carpet after seaming?

Patch extraction and installation typically takes 2 to 4 hours for a single repair area. Seaming adhesive requires 24 hours to cure fully, during which the seamed area should not bear heavy traffic or foot pressure. Light activity is acceptable after 6 hours once the seam has cooled, but full-strength use should wait until the next day.

Is professional carpet repair available in Burlington for water damage and mould concerns?

Yes. Multiline Services provides specialized water damage assessment and carpet repair in Burlington and throughout the Greater Toronto Area. Water-damaged carpet requires moisture testing and thorough pad inspection to detect mould before any repair is sealed. If mould is present, affected padding must be removed and replaced with new material, then the carpet section is either repaired or replaced depending on fibre condition.

Get your business back to business – Covid-19 Disinfection

Multiline Services disinfection process use hospital approved disinfectant and are CDC & Health Canada approved cleaners.

The process includes:

  • Electrostatic sprayer, pump, battery sprayer, or manual spray process
  • Use of hospital grade, EPA approved disinfectants
  • Adherence to CDC guidelines including PPE

High-frequency touch area disinfection include items such as:

  • Light switches
  • Handrails
  • Elevator buttons
  • Door handles and entryway doors
  • Restroom faucets and dispensers
  • Phones, keyboards and mouse devices